[vc_row][vc_column width=”1/1″][vc_row_inner][vc_column_inner][vc_empty_space][vc_single_image image=”66″ img_size=”full” alignment=”center”][vc_empty_space][vc_column_text]

Installation Instructions:

The Micky Ha Ha Power Point Safety Covers come complete with two adhesive strips located on the top and bottom of the base. To attach, simply peel off the outer tape cover and firmly press onto a cleaned and dried flat surface. The adhesive increases in strength over 24 hours so minimal handling is recommended during this period.

For more permanent installation, there are two holes, one in the top and one in the bottom of the base so the unit can be screwed to the wall. We recommend to screw the units to the wall as the most solid installation method.

The cover can be turned so cords can be directed out either the top or bottom. Perfect for higher power points such as air conditioner plugs to stop cords dangling.

Care Instructions:

Cleaning your Micky Ha Ha Power Point Safety Cover is as simple as using a damp cloth. DO NOT use solvent-based cleaners, abrasive cleaners or harsh chemicals as discoloration could occur and can damage the surface. We recommend cleaning with a plant based organic cleaning product.[/vc_column_text][/vc_column_inner][/vc_row_inner][/vc_column][/vc_row]